CHIPING DINGLI STEEL SLEEVE
The range of couplers provides a cost effective method of joining reinforcing bars, particularly when the fixed bar is already in place and there is insufficient space for a hydraulic swaging press. They are easy to install and achieve failure loads higher than 108% of the characteristic yield strength of grade 500 reinforcing bar. Neither bar end preparation to form threads, nor bar rotation required. couplers can also be used to join imperial or metric plain round or deformed reinforcing bars, making it ideal for alteration or refurbishment projects.
The bar ends are supported within the coupler by patented reversed teeth inner wall, and as the lockshear bolts are tightened, the conical ends embed themselves into the bar. As this happens the reversed teeth bite into the bar. The lockshear bolts of couplers up to and including the 20mm bar can be tightened using a wrench. For larger couplers a nut runner is recommended. In all cases heavy duty sockets should be used.
When the pre-determined tightening torque for the bolts is reached, the heads shear off leaving the top of the installed bolt slightly proud of the coupler. This provides an instant visual check of correct installation.
Drawing showing the Coupler.